How To Reset Windows 7 To Factory Settings Hp

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Deportment

HP PCs - Performing an HP Organization Recovery (Windows 7)

This document is for HP and Compaq computers that came with Windows 7 installed.

This certificate explains how to reset the computer to its original mill shipped country and is divided into sections based on the different ways of performing a organization recovery.

Support all personal files and read all caution statements before performing a system recovery.

The consummate recovery process tin take four to 6 hours or more to consummate. For all-time results, the computer should be connected to the Internet. The computer restarts several times during the procedure. Practice not turn off the power or interrupt the recovery process until the prompt to log in to Windows displays.

Types of organization recovery

Your figurer might have iii types of System Recovery available, or it might have simply 2. Use the recovery type that resolves your issue without making more changes than necessary.

System Recovery: This choice reformats the system bulldoze (usually C:), reinstalls the original operating system, and reinstalls all the original hardware drivers and software. System Recovery does not impact user created partitions. If in that location are 2 hard drives, System Recovery modifies but the drive with the operating arrangement.

caution:
If the size of the operating arrangement partitioning (usually C:) was reduced below a minimum size requirement, other user created partitions are removed and stored information is destroyed.
Manufacturing plant Reset: Mill Reset removes all partitions, reformats the entire difficult drive, reinstalls the original operating system, and reinstalls all the original hardware drivers and software. This option also recreates the required Recovery sectionalisation (usually D:) and UEFI sectionalization (ordinarily E:) and reinstalls the required software.

The Manufacturing plant Reset option returns all of the notebook'southward software to the condition it was in at the fourth dimension of buy. All user changes or additions are removed.
Minimized Image Recovery: Bachelor on many of HP's notebook computers, the Minimized Image Recovery removes all partitions, reformats the entire hard drive, reinstalls the original operating system and hardware drivers, and reinstalls HP essential software (such as HP Support Assistant and HP Recovery Manager). Minimized Image Recovery does not reinstall the trial applications and games.

Recovery from the Windows 7 desktop screen

If Windows 7 opens correctly, perform the following steps to start a system recovery from the Windows vii start menu.

Turn off the computer.
Disconnect all peripheral devices, except for the monitor, keyboard, mouse, and power cord. Remove media from internal drives, and remove whatsoever recently added internal hardware.
Turn on the computer.
Click Kickoff , click All Programs, click Recovery Manager, and then click Recovery Manager again.

If you lot are prompted for an Administrator countersign or confirmation, type the password or provide confirmation. If a User Account Control window asks if you want to allow the program to brand changes to the computer, click Yes.
Under I need assist immediately, click System Recovery.
The Recovery Manager asks if you want to restore the computer to its original manufactory shipped condition. Click Yes, and so click Adjacent.
The computer restarts. If the recovery partition on the hard disk drive is functioning correctly, the Recovery Manager window displays.

note:
If the recovery partition on the hard disk drive is not operation correctly, a set of recovery discs is needed to run a organisation recovery. Follow the instructions listed in the section Recovery from recovery discs.
Click System Recovery.
When System Recovery prompts you to dorsum upwardly your files, select a backup option:
- If you have already backed up personal files or y'all do not want to dorsum up personal files, select Recover without backing upwards your files, and then click Next. Continue to the side by side step.
- If yous want to back up your personal files, follow these steps to create a backup.
  Select Back up your files starting time (recommended), and and so click Next.
  
  Select the file types to support, and and so click Adjacent.
  
  Recovery Managing director scans the computer for storage devices. Select the storage device to save the backup, and so click Next.
  
  annotation:
  If y'all selected a CD or DVD drive, the estimator prompts you to insert a blank disc.
  
  When Recovery Manager is finished backing up files, remove the backup disc or storage device, and and so click Next to continue with the recovery process.
  
  note:
  If the backup process fails, make certain the capacity of the storage device is large plenty to store the files, or try de-selecting some file types to reduce the amount of files that are copied. Other reasons for failed backups might be caused by file corruption. In some cases, it might not be possible to save files using this fill-in method.
Click OK in the warning that displays.
Subsequently the system recovery is consummate, click Finish to restart the computer. Complete the setup screens and wait until the figurer finishes the setup.
In one case the setup is complete, turn off the computer, reconnect all devices and cables, and and so plow on the computer.
Earlier using the computer, update and protect your computer. Reinstall whatsoever virus and security software that was installed before the system recovery.
Reinstall whatever software programs that were added afterwards purchasing the figurer, too as any files that were backed up.

Recovery from the startup screen (during arrangement boot) OR when unable to boot to login in screen

If Windows 7 does non open up correctly, perform the following steps to recover the computer:

note:
If the recovery division on the hard disk drive is not functioning correctly, this method does non work and an error message displays. If an error message indicates that System Recovery cannot be run from the startup screen, a set of recovery discs is needed to perform a system recovery. Follow the instructions listed in the section Recovery from recovery discs.

Turn off the calculator.
Disconnect all peripheral devices, except for the monitor, keyboard, mouse, and power cord. Remove media from internal drives, and remove any recently added internal hardware.
Turn on the computer and repeatedly press the F11 key, nearly once every 2nd, until Recovery Manager opens.
Under I need assist immediately, click Organization Recovery.
When System Recovery prompts you to dorsum upwardly your files, select a backup option:
- If you have already backed up personal files or you do not want to support personal files, select Recover without bankroll up your files, and and then click Next. Continue to the next step.
- If you want to back upward your personal files, follow these steps to create a backup.
  Select Back up your files get-go (recommended), and then click Next.
  
  Select the file types to back upward, so click Next.
  
  Recovery Manager scans the computer for storage devices. Select the storage device to salve the fill-in, and then click Next.
  
  note:
  If you selected a CD or DVD drive, the computer prompts you to insert a blank disc.
  
  When Recovery Manager is finished backing up files, remove the backup disc or storage device, and and so click Next to continue with the recovery process.
  
  note:
  If the fill-in process fails, brand sure the capacity of the storage device is big enough to store the files, or try de-selecting some file types to reduce the amount of files that are copied. Other reasons for failed backups might be caused by file corruption. In some cases, it might non be possible to relieve files using this backup method.
Click OK in the warning that displays.
After the arrangement recovery is complete, click Finish to restart the computer. Complete the setup screens and wait until the calculator finishes the setup.
Once the setup is consummate, plow off the computer, reconnect all devices and cables, and then turn on the reckoner.
Before using the computer, update and protect your computer. Reinstall whatever virus and security software that was installed before the arrangement recovery.
Reinstall any software programs that were added after purchasing the computer, every bit well equally whatever files that were backed up.

Recovery from recovery discs

Perform the following steps to recover the computer using a set of recovery discs (either CDs or DVDs). These discs can be a set up that was received from HP Back up or discs that you lot created.

note:
HP does not include recovery discs in the box its personal computers as the recovery software comes on the hard bulldoze. You can obtain recovery discs from HP Support, or utilize Recovery Manager software to create a set of recovery discs yourself. HP recommends creating a gear up of recovery discs when you receive your computer and storing them in a safe identify. Back up Sent Recovery Discs can have as long equally iv to 6 hours to complete system recovery, but recovery discs that you create often take less fourth dimension to complete system recovery. For more information well-nigh creating a set of recovery discs, see Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive in Windows 7.

Plow on the reckoner, and so insert the first recovery disc into the bulldoze.
Press and hold the power button to plow off the figurer.
Disconnect all peripheral devices, except for the monitor, keyboard, mouse, and power cord. Remove media from internal drives, and then remove any recently added internal hardware.
Plow on the computer.
Immediately press the Escape key repeatedly, almost once every 2d, until a Startup Carte or Select boot device carte du jour opens.
The selections you need to make vary slightly depending on the type of carte du jour that displays on your screen:
- If a Select Boot Device menu displays, use the upwards or down pointer fundamental to select the CD/DVD drive, and then printing Enter to proceed.
- If a Startup Carte opens, printing F9 to open "Kick Carte" or "Boot Device Options". Use the up or downwardly pointer key to select the CD/DVD drive. And then printing Enter.
  
  note:
  More than i CD/DVD drive selection might be available from the list of bootable devices. If so, select 1 of the CD/DVD selections from the list to encounter if HP Recovery starts. If recovery does not start or a not-system disk fault displays, restart the computer past pressing the power button and and so echo these steps to select some other CD/DVD drive. When recovery starts, continue using the steps to complete recovery.
A window might brandish and prompt you to choose whether to run Recovery Managing director from the hard disk or from the disc inserted. If this window displays, select the Run plan from disc, and then click Next.
Select an option based on the type of recovery discs yous have:
- Recovery discs created from your reckoner:
  
  Click Factory Reset nether I demand help immediately. If the next screen prompts you to confirm your pick, select Yes and so click Next. If no confirmation screen displays, keep with the next pace.
- Recovery discs received from HP support:
  
  Select 1 of the following selections, depending on which choice is shown on your screen, and and then click Next.
  - Manufactory Reset - Reset the computer past erasing the unabridged drive and restoring to the manufacturing plant setup
  - Reset the computer by erasing the entire drive and restoring to the factory setup
When Arrangement Recovery prompts you to support your files, select a backup option:
- If you lot accept already backed up personal files or y'all do non want to back up personal files, select Recover without backing up your files, and and so click Next. Proceed to the adjacent pace.
- If you want to support your personal files, follow these steps to create a backup.
  Select Support your files first (recommended), and then click Next.
  
  Select the file types to dorsum up, and then click Adjacent.
  
  Recovery Manager scans the computer for storage devices. Select the storage device to relieve the backup, and so click Next.
  
  note:
  If you selected a CD or DVD drive, the computer prompts you to insert a bare disc.
  
  When Recovery Managing director is finished bankroll up files, remove the fill-in disc or storage device, then click Next to continue with the recovery process.
  
  note:
  If the fill-in process fails, make sure the capacity of the storage device is large enough to store the files, or try de-selecting some file types to reduce the amount of files that are copied. Other reasons for failed backups might be acquired by file corruption. In some cases, it might not be possible to save files using this backup method.
Click OK in the warning that displays.
Read and answer to the screens as they display. If a screen prompts for a disc, insert the next disc. In some cases, you might accept to repeatedly insert the aforementioned disc several times earlier the screen allows you to go along.
Subsequently system recovery is consummate, remove the disc. If the tray does non eject the disc, printing the eject push on the PC case to eject the disc.
If yous are presented with a "Restoration complete" screen, click Terminate.

If you are presented with a "File copy is consummate" screen, click Next.
Depending on which model of computer you have, the estimator either turns off or restarts. If the calculator shuts off, look 5 seconds and turn on the computer.

note:
If you lot are using Support Sent Recovery discs sent from HP, it tin can take more than an hour to complete the recovery procedure. Do non interrupt the recovery procedure. The recovery process is complete when the Windows Setup screens appear.
Complete Windows setup when the screens appear.
Once Windows setup has been completed, turn off the computer, reconnect all devices and cables, and so turn on the estimator.
Before using the computer, update and protect your computer. Reinstall any virus and security software that was installed before the system recovery.
Reinstall whatsoever software programs that were added later on purchasing the figurer, equally well as any files that were backed upward.

Boot from USB recovery drive

Perform the following steps to recover the figurer using a USB flash drive.

Turn on the computer, and insert the USB wink drive into a USB port.
Turn off the computer by pressing and holding the power button.
Disconnect all peripheral devices, except for the monitor, keyboard, mouse, and power cord. Remove media from internal drives, and remove any recently added internal hardware.
Immediately press the Escape cardinal repeatedly, most once every 2d, until a Startup or Select Boot Device Carte du jour opens.
The selections y'all need to make vary slightly depending on the type of menu that displays on your screen:
- If a "Select Boot Device" bill of fare displays, use the up or down arrow key to select your USB Storage Device, and press Enter to continue.
- If a "Startup Menu" opens, press F9 to open up the "Boot Menu" or "Boot Device Options". Use the upwards or down pointer key to select the name of your USB Storage Device (the book label of the drive). So press Enter to continue.
A window might display and prompt y'all to choose whether to run Recovery Manager from the hard disk or from the media inserted. If this window displays, select the USB flash drive selection, and and then click Side by side.
Click System Recovery under I demand help immediately. On the next screen, select Yes to ostend that you desire to restore your reckoner to its original manufacturing plant condition, and then click Adjacent to continue.
When Arrangement Recovery prompts yous to support your files, select a backup pick:
- If you have already backed up personal files or you exercise not want to back up personal files, select Recover without backing upwardly your files, and and so click Adjacent. Go along to the next pace.
- If you lot want to back up your personal files, follow these steps to create a backup.
  Select Back up your files first (recommended), and then click Side by side.
  
  Select the file types to support, then click Next.
  
  Recovery Director scans the computer for storage devices. Select the storage device to save the backup, so click Next.
  
  When Recovery Manager is finished backing upward files, remove the fill-in disc or storage device, and and then click Side by side to go along with the recovery process.
  
  notation:
  If the fill-in process fails, make sure the capacity of the storage device is large enough to store the files, or endeavor de-selecting some file types to reduce the amount of files that are copied. Other reasons for failed backups might be caused by file corruption. In some cases, it might not exist possible to salve files using this backup method.
Click Next. A bulletin displays alarm you that all devices should be asunder from the PC. Be sure all devices, except the recovery wink drive, are asunder, and then click OK.
Read and respond to the screens as they announced. After arrangement recovery is complete, a "Restoration complete" screen displays.
Remove the USB flash drive from the USB port.
Click Finish to restart your reckoner.
Depending on the model of your computer, the computer either turns off or restarts. If the reckoner turns off, wait 5 seconds, and then turn on the computer.
Complete Windows setup when the screens appear.
Once Windows setup has been completed, turn off the computer, reconnect all devices and cables, then plow on the reckoner.
Before using the computer, update and protect your computer. Reinstall any virus and security software that was installed earlier the arrangement recovery.
Reinstall any software programs that were added after purchasing the computer, besides as whatsoever files that were backed upwardly.